Air Pre-Heater Corten Steel Tube ASTM A423 Grade-1
We are Stockholder & Distributors of ASTM A423 Grade-1, ASME SA423 Grade-1 Air Pre Heater ERW Corten Steel Boiler Tubes with IBR & Non-IBR
AIR PRE-HEATER TUBES
AIR PRE-HEATER ERW TUBES
AIR PREHEATER TUBES
AIR PREHEATER ERW TUBES
AIR PRE HEATER TUBES
AIR PRE HEATER ERW TUBES
APH TUBES
APH ERW TUBES
APH CORTEN STEEL TUBES
APH CORTEN STEEL ERW TUBES
CORTEN STEEL BOILER TUBES
CORTEN STEEL ERW TUBES
ASTM A423 / ASTM A 423 TUBES
ASTM A423 / ASTM A423 CORTEN STEEL TUBES
ASTM A423 Grade-1 / ASTM A 423 Grade-1 TUBES
ASME SA423 Grade-1 / ASME SA 423 Grade-1 TUBES
ASTM A423 Grade-1 / ASME SA423 Grade-1 ERW TUBES
ASTM A 423 Grade-1 / ASME SA 423 Grade-1 ERW TUBES
ASTM A423 / A423M - 09(2014)
Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
This specification covers standards for minimum-wall-thickness, seamless, and electric-resistance welded low-alloy steel tubes to be used for pressure containing parts, that is economizers, and for other corrosion resistant applications. Steel tubes shall either be processed to hot or cold finish. All tubes shall be normalized or given such heat treatment as may be necessary to conform to the requirements of this specification. Chemical composition shall adhere to specified carbon, manganese, phosphorus, sulfur, silicon, copper, chromium, nickel, and molybdenum contents. Tension, flattening, flaring, flange, hardness, reverse flattening, and hydrostatic tests shall be performed. Tubes when inserted in the boiler shall stand expanding and bending without showing cracks or flaws. Tubes shall also conform to tensile strength, yield strength, hardness, and elongation requirements.
1. Scope
1.1 This specification2 covers minimum-wall-thickness, seamless and electric-resistance welded, low-alloy steel tubes for pressure containing parts such as economizers or other applications where corrosion resistance is important.
1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/2 to 5 in. [12.7 to 127 mm] in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm] inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.
1.3 Mechanical property requirements do not apply to tubing smaller than 1/4 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.
1.4 An optional supplementary requirement is provided and, when desired, shall be so stated in the order.
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.
ASTM Standards
A450/A450M Specification for General Requirements for Carbon and Low Alloy Steel Tubes
E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing
E273 Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
Keywords
Alloy Steel - Boilers And Pressure Vessels - Corrosive Service Applications - Electric Resistance-Welded Steel Tubes - Pressure-Containing Parts - Seamless Pipes And Tubes - Seamless Steel Tubes - Welded Pipes And Tubes - Welded Steel Tubes
Carbon Steel Boiler and Heat Exchanger Tubes
| ASTM |
ASME |
JIS G 3461 |
BS |
DIN |
ISO |
ABS |
NK |
LRS |
DNV |
| A178 |
SA178 A |
STB 340 |
3059-P1 320 |
17175 st 35.8 |
|
ABS D |
KSTB 33 |
Sec 6 320 |
Sec 4-E-TS360 |
| |
|
|
3059-P2 360 |
17177 st 37.8 |
|
|
|
|
|
| AA179 |
SA179 |
|
3606 320 |
|
|
ABS G |
KSTB 35 |
Sec 6 360 |
|
| A192 |
SA192 |
|
|
|
|
ABS H |
|
|
|
| A214 |
SA214 |
|
|
|
|
|
|
|
|
| A556 A2 |
SA556 A2 |
|
|
|
|
|
|
|
|
| A178 C |
SA178 C |
STB 410 |
3059-P2 440 |
17175 st 45.8 |
|
ABS F |
KSTB 42 |
Sec 6 410 |
Sec 4-E-TS410-1 |
| A210 A1 |
SA210 A1 |
|
3606 440 |
17177 st 42.8 |
|
ABS J |
|
|
|
| A556 B2 |
SA556 B2 |
|
|
|
|
|
|
|
|
| |
|
STB 510 |
|
17175 19Mn 5 |
|
|
|
|
Sec 4-E-TS510 |
| A178 D |
SA178 D |
|
|
|
|
|
|
Sec 6 460 |
Sec 4-E-TS460-1 |
| A210 C |
SA210 C |
|
|
|
|
|
|
|
|
| A556 C2 |
SA556 C2 |
|
|
|
|
|
|
|
|
Alloy Steel Boiler and Heat Exchanger Tubes
| ASTM |
ASME |
JIS G 3462 |
BS |
DIN |
ISO |
ABS |
NK |
LRS |
DNV |
| A209 T1 |
SA209 T1 |
STBA 12 |
3606 243 |
17175
15Mo3 |
2604 II TS26 |
ABS K |
KSTB 12 |
|
Sec
4-E-TS380 |
| A250 T1 |
SA250 T1 |
|
3606 245 |
17177
15Mo3 |
2604 III TS26 |
|
|
|
|
| A209 T1a |
SA209 T1a |
STBA 13 |
|
|
|
ABS L |
|
|
|
| A250 T1a |
SA250 T1a |
|
|
|
|
|
|
|
|
| A213 T2 |
SA213 T2 |
STBA 20 |
|
17175
14MoV83 |
2604 II TS33 |
|
|
|
Sec
4-E-TS440 |
| A250 T2 |
SA250 T2 |
|
|
|
|
|
|
|
|
| A213 T12 |
SA213 T12 |
STBA 22 |
3606 620 |
17175
13CrMo44 |
2604 II TS32 |
ABS O |
KSTB 22 |
Sec 6
1Cr 1/2Mo-440 |
Sec
4-E-TS410-3 |
| A250 T12 |
SA250 T12 |
|
|
|
2604 III TS32 |
|
|
|
|
| A213 T11 |
SA199 T11 |
STBA 23 |
3606 621 |
|
|
ABS N |
KSTB 23 |
|
Sec
4-E-TS410-4 |
| |
SA213 T11 |
|
|
|
|
|
|
|
|
| A213 T22 |
SA199 T22 |
STBA 24 |
3606 622 |
17175
10CrMo910 |
2604 II TS34 |
ABS P |
KSTB 24 |
Sec 6
2-1/2Cr 1Mo-410 |
Sec
4-E-TS450-2 |
| |
SA213 T22 |
|
|
|
|
|
|
|
|
| A213 T5 |
SA199 T5 |
STBA 25 |
3606 625 |
|
2604 II S37 |
|
|
|
Sec
4-E-TS430 |
| |
SA213 T5 |
|
|
|
|
|
|
|
|
| A213 T9 |
SA199 T9 |
STBA 26 |
3059-P2 622-490 |
|
2604 II S38 |
|
|
|
Sec
4-E-TS500 |
| |
SA213 T9 |
|
|
|
|
|
|
|
|
| A209 T1b |
SA209 T1b |
|
3059-P2 243 |
17175
17Mn4 |
2604 II S39 |
ABS M |
|
Sec 6
2-1/2Cr 1Mo-490 |
Sec
4-E-TS450-1 |
| |
|
|
3059-P2 620-460 |
|
|
(=A209-
T1b) |
|
|
|
| A250 T1b |
SA250 T1b |
|
3059-P2 629-470 |
17175
14MoV63 |
2604 II S40 |
|
|
|
Sec
4-E-TS460-2 |
| A250 T11 |
SA250 T11 |
|
3059-P2 629-590 |
17175
X20CrMoV12 1 |
|
|
|
|
Sec
4-E-TS590 |
| A250 T22 |
SA250 T22 |
|
3059-P2 762 |
|
|
|
|
|
Sec
4-E-TS610 |
| A213 T5b |
SA213 T5b |
|
3059-P2 304S51 |
|
|
|
|
|
Sec
4-E-TS690 |
| A213 T5c |
SA213 T5c |
|
3059-P2 306S51 |
|
|
|
|
|
|
| A213 T17 |
SA213 T17 |
|
3059-P2 316S52 |
|
|
|
|
|
|
| A213 T21 |
SA213 T21 |
|
3059-P2 316S51 |
|
|
|
|
|
|
| A213 T23 |
SA213 T23 |
|
3059-P2 321S51 |
|
|
|
|
|
|
| A213 T91 |
SA213 T91 |
|
3059-P2 347S51 |
|
|
|
|
|
|
| A213 T92 |
SA213 T92 |
|
3059-P2 215S15 |
|
|
|
|
|
|
Steel Heat Exchanger Tubes for Low Temperature Service
| ASTM |
ASME |
JIS G 3464 |
BS |
DIN |
ISO |
ABS |
NK |
LRS |
DNV |
| A334 1 |
SA334 1 |
STBL 380 |
3603 430LT |
17173 TTst35N/V |
|
|
|
|
|
| |
|
|
|
17174 TTst35N/V |
|
|
|
|
|
| A334 3 |
SA334 3 |
STBL 450 |
3603 503LT |
17173 10Ni14 |
2604 II TS43 |
|
|
|
|
| A334 8 |
SA334 8 |
STBL 690 |
3603 509LT |
17173 X8Ni9 |
2604 II TS45 |
|
|
|
|
| A334 6 |
SA334 6 |
|
|
17173 26CrMo4 |
|
|
|
|
|
| A334 7 |
SA334 7 |
|
|
17173 11MnNi53 |
|
|
|
|
|
| |
|
|
|
17174 11MnNi53 |
|
|
|
|
|
| A334 9 |
SA334 9 |
|
|
17173 13MnNi63 |
|
|
|
|
|
| |
|
|
|
17174 13MnNi63 |
|
|
|
|
|
| A334 11 |
SA334 11 |
|
|
17173 12Ni19 |
|
|
|
|
|
| |
|
|
|
17174 12Ni19 |
|
|
|
|
|
| A423 1 |
SA423 1 |
|
|
(17174 10Ni14) |
|
|
|
|
|
| A423 2 |
SA423 2 |
|
|
(17174 X8Ni9) |
|
|
|
|
|
Steel Tubes for Fired Heater
| ASTM |
ASME |
JIS G 3467 |
ABS |
NK |
LRS |
DNV |
| A210 A1 |
SA210 A1 |
STFA 10 |
|
|
|
|
| A209 T1 |
SA209 T1 |
STFA 12 |
|
|
|
|
| A213 T12 |
SA213 T12 |
STFA 22 |
|
|
|
|
| A213 T11 |
SA213 T11 |
STFA 23 |
|
|
|
|
| A213 T22 |
SA213 T22 |
STFA 24 |
|
|
|
|
| A213 T5 |
SA213 T5 |
STFA 25 |
|
|
|
|
| A213 T9 |
SA213 T9 |
STFA 26 |
|
|
|
|
Alloy Steel Tubes for Generator Boiler
| ASTM |
ASME |
KA |
ABS |
NK |
LRS |
DNV |
| |
|
KA-STBA 21 |
|
|
|
|
| A213 T23 |
SA213 T23 |
KA-STBA 24J1 |
|
|
|
|
| A213 T91 |
SA213 T91 |
KA-STBA 28 |
|
|
|
|
Carbon Steel Pipes for Pressure Service
| ASTM |
ASME |
JIS G 3454 |
BS |
DIN |
ISO |
ABS |
NK |
LRS |
DNV |
| A53 A |
SA53 A |
STPG 370 |
3601 320 |
1626 ust37.0 |
2604 II TW4 |
ABS 2 |
KSTPG 38 |
Sec 2 320 |
Sec 4-B-TS360 |
| |
|
|
|
|
2604 III TS4 |
|
|
Sec 2 360 |
|
| A135 A |
SA135 A |
|
3601 360 |
1626 st37.0 |
2604 II TS5 |
ABS 8 |
|
Sec 3 320 |
Sec 4-B-TW360 |
| |
|
|
|
|
2604 III TW5 |
|
|
Sec 3 360 |
|
| |
|
|
|
1629 st37.0 |
2604 II TS6 |
|
|
|
|
| |
|
|
|
|
2604 III TW6 |
|
|
|
|
| A53 B |
SA53 B |
STPG 410 |
3601 430 |
1626 st44.0 |
2604 II TS9 |
ABS 3 |
KSTPG 42 |
Sec 2 410 |
Sec 4-B-TS410 |
| |
|
|
|
|
2604 III TW9 |
|
|
|
Sec 4-B-TW410 |
| A135 B |
SA135 B |
|
|
1629 st44.0 |
2604 II TS10 |
ABS 9 |
|
Sec 3 410 |
Sec 4-B-TS430 |
| |
|
|
|
|
2604 III TW10 |
|
|
|
Sec 4-B-TW430 |
| |
|
|
|
1626 st52.0 |
2604 II TS13 |
|
|
Sec 2 460 |
Sec 4-B-TS500 |
| |
|
|
|
|
2604 III TW13 |
|
|
|
Sec 4-B-TW500 |
| |
|
|
|
1629 st52.0 |
2604 II TS14 |
|
|
Sec 2 490 |
|
| |
|
|
|
|
2604 III TW14 |
|
|
Sec 3 460 |
|
Carbon Steel Pipes for High Pressure Service
| ASTM |
ASME |
JIS G 3455 |
BS |
DIN |
ISO |
ABS |
NK |
LRS |
DNV |
| |
|
STS 370 |
|
1630 st37.4 |
|
|
KSTS 38 |
|
|
| |
|
STS 410 |
|
1630 st44.4 |
2604 II TS15 |
|
KSTS 42 |
|
|
| |
|
STS 480 |
|
1630 st52.4 |
2604 II TS18 |
|
KSTS 49 |
|
|
Carbon Steel Pipes for High Temperature Service
| ASTM |
ASME |
JIS G 3456 |
BS |
DIN |
ISO |
ABS |
NK |
LRS |
DNV |
| A106 A |
SA106 A |
STPT 370 |
3602 P1 360 |
17175 st35.8 |
|
ABS 4 |
KSTPT 38 |
|
|
| |
|
|
|
17177 st37.8 |
|
|
|
|
|
| A106 B |
SA106 B |
STPT 410 |
3602 P1 430 |
17175 st45.8 |
|
ABS 5 |
KSTPT 42 |
|
|
| |
|
|
|
17177 st42.8 |
|
|
|
|
|
| A106 C |
SA106 C |
STPT 480 |
3602 P1 500Nb |
17175 17Mn4 |
|
|
KSTPT 49 |
|
|
| |
|
|
|
17175 19Mn5 |
|
|
|
|
|
Alloy Steel Pipes for High Temperature Service
| ASTM |
ASME |
JIS G 3458 |
BS |
DIN |
ISO |
ABS |
NK |
LRS |
| A335 P1 |
SA335 P1 |
STPA 12 |
|
17175
15Mo3 |
2604 II TS26 |
ABS 6 |
KSTPA 12 |
|
| |
|
|
|
17177
15Mo3 |
2604 III TW26 |
|
|
|
| A335 P2 |
SA335 P2 |
STPA 20 |
3604 P1 660 |
|
2604 II TS32 |
ABS 7 |
|
|
| |
|
|
|
|
2604 III TW32 |
|
|
|
| A335 P12 |
SA335 P12 |
STPA 22 |
3604 P1 620-440 |
17175
13CrMo44 |
|
ABS 12 |
KSTPA 22 |
Sec 2
1Cr 1/2Mo440 |
| |
|
|
|
|
|
|
|
Sec 3
1Cr 1/2Mo440 |
| A335 P11 |
SA335 P11 |
STPA 23 |
3604 P1 621 |
|
|
ABS 11 |
KSTPA 23 |
|
| A335 P22 |
SA335 P22 |
STPA 24 |
3604 P1 622 |
17175
10CrMo910 |
2604 II TS34 |
ABS 13 |
KSTPA 24 |
Sec 2
2-1/4Cr1Mo410 |
| A335 P5 |
SA335 P5 |
STPA 25 |
3604 P1 625 |
|
2604 III TS37 |
ABS 14 |
|
|
| A335 P9 |
SA335 P9 |
STPA 26 |
3604 P1 629-470 |
|
2604 II TS38 |
|
|
|
| A335 P5b/P5c |
SA335 P5b/P5c |
|
3604 P1 591 |
17175
14MoV63 |
2604 II TS33 |
|
|
Sec 2
2-1/2Cr1Mo490 |
| A335 P15 |
SA335 P15 |
|
3604 P1 629-590 |
17175
X20CrMoV12 1 |
2604 II TS39 |
|
|
Sec 2
/2Cr1/2Mo1/4V460 |
| A335 P21 |
SA335 P21 |
|
3604 P1 762 |
|
2604 II TS40 |
|
|
|
| A335 P91 |
SA335 P91 |
|
|
|
|
|
|
|
| A335 P92 |
SA335 P92 |
|
|
|
|
|
|
|
Steel Pipes for Low Temperature Service
| ASTM |
ASME |
JIS G 3460 |
BS |
DIN |
ISO |
ABS |
NK |
LRS |
DNV |
| A333 1 |
SA333 1 |
STPL 380 |
3603 430LT |
17173 TTst35N |
|
ABS 1L |
KLP A |
Sec 4
360 |
Sec
4-D-TS6 |
| |
|
|
|
17173 TTst35V |
|
|
KLP B |
|
Sec
4-D-TW6 |
| A334 1 |
SA334 1 |
|
|
17174 TTst35N |
|
|
KLP C |
|
Sec
4-D-TS10 |
| |
|
|
|
17174 TTst35V |
|
|
|
|
Sec
4-D-TW10 |
| A333 3 |
SA333 3 |
STPL 450 |
3603 503LT |
17173 10Ni14 |
2604 TS43 |
ABS 4L |
KLP 3 |
Sec 4
3.5Ni440 |
Sec
4-D-TS43 |
| A333 8 |
SA333 8 |
STPL 690 |
3603 509LT |
17173 X8Ni9 |
2604 TS45 |
ABS 5L |
KLP 9 |
Sec 4
9Ni690 |
Sec
4-D-TS45 |
| A333 4, A334 3 |
SA333 4, SA334 3 |
|
|
17173 26CrMo4 |
|
ABS 2L |
KLP 2 |
Sec 4
410 |
Sec
4-D-TS15 |
| |
|
|
|
|
|
|
|
|
Sec
4-D-TW15 |
| A333 6, A334 6 |
SA333 6, SA334 6 |
|
|
17173 11MnNi53 |
|
ABS 3L |
|
Sec 4
60 |
Sec
4-D-26CrMo4 |
| |
|
|
|
17174 11MnNi53 |
|
|
|
|
Sec
4-D-TW43 |
| A333 7, A334 7 |
SA333 7, SA334 7 |
|
|
17173 13MnNi63 |
|
ABS 6L |
|
|
Sec
4-D-11MnNi53 |
| |
|
|
|
17174 13MnNi63 |
|
|
|
|
Sec
4-D-TW45 |
| A333 9, A334 8 |
SA333 9, SA334 8 |
|
|
17173 12Ni19 |
|
|
|
|
Sec
4-D-13MnNi63 |
| |
|
|
|
17174 12Ni19 |
|
|
|
|
|
| A333 10, A334 9 |
SA333 10, SA334 9 |
|
|
17174 10Ni14 |
|
|
|
|
Sec
4-D-12Ni19 |
| A333 11, A334 11 |
SA333 11, SA334 11 |
|
|
17174 X8Ni9 |
|
|
|
|
|
Alloy Steel Pipes for Generator Piping
| ASTM |
ASME |
KA |
BS |
DIN |
ISO |
ABS |
NK |
LRS |
DNV |
| A335 P23 |
SA335 P23 |
KA-STPA 24J1 |
|
|
|
|
|
|
|
| A335 P91 |
SA335 P91 |
KA-STPA 28 |
|
|
|
|
|
|
|
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 - 9820292499
Email - marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI - 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email - marketing@rolexmetals.com
Website – www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
