Oil Tempered Spring Steel Wires
We are Stockholder & Distributors of Oil Tempered SiCr-Alloyed Wire for Valve Springs, SWOSC-V Oil Tempered Wire, SWOSC-V OT Wires, SWOSC-VU Oil Tempered Wire, SWOSC-VU OT Wires, SAE 9254 Wire, SAE9254 Wires, SAE 6150 Wire, SAE6150 Wires, SAE 1070 Wire, SAE1070 Wires, SWOSC-VH Oil Tempered Wire, SWOSC-VH OT Wires, HRS7-V Oil Tempered Wire, HRS7-V OT Wires, SWOSC-VT Oil Tempered Wire, SWOSC+VT OT Wires, KHV7 Oil Tempered Wire, KHV7 OT Wire, SWOSC-VX Oil Tempered Wire, SWOSC+VX OT Wires, KHV10N Oil Tempered Wire, KHV10N OT Wires, SWOSC-VXT Oil Tempered Wire, SWOSC+VXT OT Wires, KHV12N Oil Tempered Wire, KHV12N OT Wires, OTEVA 70 Oil Tempered Wire, OTEVA-70 OT Wires, SiCrVMoW Oil-Tempered Wire, SiCrVMo Oil-Tempered Wire, SiCrVNi Oil-Tempered Wire, SiCrV Oil-Tempered Wire, SiCr Oil-Tempered Wire, SWOSC-VHV Oil-Tempered Wire, SWO-V Oil-Tempered Wire, 75KD SiCrV Oil-Tempered Wire, STATO 75 SiCrV Oil-Tempered Wire, STATO 70 SiCr Oil-Tempered Wire, PENTHOR 864 Oil-Tempered Wires, PENTHOR 854 Oil-Tempered Wires, PENTHOR 843 Oil-Tempered Wires, PENTHOR 842 Oil-Tempered Wires, PENTHOR 811 Oil-Tempered Wires, PENTHOR 911 Oil-Tempered Wires, KISWIRE Oil-Tempered Wires, SUZUKI GARPHYTTAN Oil-Tempered Wires, PENGG USHA MARTIN Oil-Tempered Wires, PENGG AUSTRIA Oil-Tempered Wires, SUGITA WIRE Oil-Tempered Wires, Oil-Tempered Wires for Valve Springs
| Our Product |
Finish |
Size Range (mm) |
End Application |
| AUTO CABLE WIRE |
Black/Galvanised |
0.13-2.80 |
Auto Speedometer cable inners & Rolling Quality for Auto cable Outers. |
| SPRING STEEL WIRE |
Black |
0.13-4.50 |
Grades I, II & III for making Springs used in Auto & Engg. Sectors |
| UPHOLSTRY SPRING WIRE |
Black |
1.40-4.00 |
For making Springs in Upholstry & Mattresses |
| FLEXIBLE SHAFT WIRE |
Black |
0.30-1.80 |
Used in making Flexible Shafts |
| FLOAT WIRES |
Black |
1.80-2.50 |
For making Wire Forms used in Auto sector and float-assembly in fuel tanks. |
| OIL SEAL WIRES |
Galavanised |
0.20-0.60 |
Used in making Oil-Seals |
| HAIR PIN WIRES |
Black |
0.80-1.60 |
Used in making Hair-pins |
| ROPERY WIRES |
Black/Galvanized |
0.13-3.00 |
Used in manufacture of Wire Ropes |
| ACSR CORE WIRES |
Galvanized |
1.50-4.09 |
For use as steel reinforcement in Aluminium conductors for Extra High/Normal voltage overhead transmission. |
| roduct |
Size Range (mm) |
Specification |
Grade |
Application |
Galvanised Iron (G.I.)
(Hot Dipped & Electroplated) |
0.63-5.00 |
IS 280
As per customer’s requirement |
Mild Steel |
Galvanised wire for General Engineering Purpose, I.E. netting, fencing, barbing and other applications. |
| Galvanised Steel Strand |
7x1.50
to 7x4.75 |
IS 2141, IS:12776 ASTMA 473, ASTMA 363, BS 183, DIN 48200, 48201, 48202, VEDO 210 |
Mild Steel / High Carbon, Medium Carbon |
Wires for electrical & transmission lines |
| H.B. Wires for Nails |
0.63-10.0 |
As per Customer’s requirement |
Mild Stee |
Wires for Nail Industry |
| Cable Armour Wires (Round) |
0.63-4.0 |
IS 3975, BS 1441 As per customer’s requirement |
Low Carbon / Electrode |
Wires for Cable and Conductor Industry |
| Cable Armouring Formed Wire |
4x3.4x0.8 |
IS 3975, BS 1441 |
Low Carbon / Electrode |
Cable Industry |
| ACSR Core Wire Single |
1.50-4.75 |
IS 398 Part 2&5
ASTMB 498, BS 4565, IEC 209 |
High Carbon |
Wires for Conductor Industry. |
| ACSR Core Wire Stranded |
7x1.5 To 7x4.75 |
IS 398,
ASTM-B 500,
BS 215 PART-2 |
High Carbon |
Wires for Conductor Industry |
| P.C. Single (as drawn) |
1.50-5.00 |
IS 1785-II,
ASTM-A 648,
BS 2962-SEC I/IV |
High Carbon |
Wires for Prestressed Concrete Industry |
| P.C. Single Wire Stress Relieved (Normal Relaxation) |
3.00-9.50 |
IS 1785-I (Plain),
IS 6003 (Indented)
ASTM-4421, BS 2691
SEC 1/77 |
High Carbon |
For re-enforcement of Concrete Poles & other Concrete Structures) |
| P.C. Strand 3 Ply Stress Relieved (Normal Relaxation) |
3X3.00 |
IS 6003
ASTM-A 416
BS 3617
JIS-G 3536 |
High Carbon |
For re-enforcement of Concrete Rly. Sleeper. |
| P.C. Strand 7 Ply Stress Relieved (Normal Relaxation) |
6.35-12.50 |
IS 6006,
ASTM - A416
BS 3617,
JIS G 3536 |
High Carbon |
For re-enforcement of Concrete Beams in bridges / concrete poles etc. |
| Bright Spoke Wire |
1.80- 4.00 |
IS 6902,
BS 2453
As per customer’s requirement |
High Carbon |
Wires for Cycle & Two Wheeler Industry |
| Galvanised Spoke Wire |
1.80-4.00 |
IS 6902, BS 2453
As per customer’s requirement |
High Carbon |
For making Spokes for Cycles & Two Wheelers. |
| Cycle Accessories Wire |
2.00-10.00 |
As per customer’s requirement |
Mild Steel |
Wires for Cycle & Two Wheeler Industry |
| Shutter Spring Wire |
4.00-9.50 |
As per customer’s requirement |
High Carbon |
For making Spring of Rolling Shutters |
| Spring Steel Wire |
0.30-8.50 |
IS 4454 Part 1 GradeI/II/III/IV |
High Carbon |
Springs |
| Telegraph Wire |
2.00–5.60 |
IS 279, IS 280 |
Mild Steel |
Telecom Industry |
| Rope Wire (Black & Galvanised) |
0.30-2.00 |
IS: 1835, BS: 2763
As per customer’s requirement |
High Carbon |
Rope making & Auto cables |
| Umbrella Rib |
1.50–3.0 |
As per customer’s requirement |
High Carbon |
Umbrella Industry |
| Chain Rivet / Link Wire |
3.60-6.00 |
As per customer’s requirement |
Mild Steel
16Mn Cr5
20Mn Cr5
EN 353, 354 |
Chain & Two-wheeler Industry |
| Cotton Bailing Wires |
3.15-3.66 |
As per customer’s requirement |
High Carbon |
For Cotton Bailing industry |
| Spring Steel – Medium Carbon Wire |
| Indian Standard |
: |
IS 4454 Part I, Grade-2 |
| Equivalent International Standards |
: |
ASTM A 227 |
| UNI 3823 Class B |
| DIN 17223-1-1.0600 |
| DIN 2076-B |
| EN 10270-1(SM, DM) |
| JIS-3522 |
| Chemical Composition |
| Carbon(C) |
: |
0.60-0.85 |
| Manganese (Mn) |
: |
0.80 Max |
| Silicon (Si) |
: |
0.15-0.35 |
| Phosphorus (P) |
: |
0.04 Max |
| Sulphur(S) |
: |
0.04 Max |
| |
| |
| Spring Steel – High Carbon |
| |
| Indian Standard |
: |
IS 4454 Part I Grade 3 |
| Equivalent International Standards |
: |
ASTM A 228 |
| UNI-3823 Class C |
| DIN 17223-1-1.0200 |
| DIN 2076-C |
| EN 10270-1-(SH, DH) |
| JIS – 3522 |
| Chemical Composition |
| Carbon(C) |
: |
0.75-1.00 |
| Silicon (Si) |
: |
0.15-0.35 |
| Manganese (Mn) |
: |
0.80 Max |
| Phosphorus (P) |
: |
0.03(Max) |
| Sulphur (S) |
: |
0.03(Max) |
| |
| |
| Spring Steel – Oil tempered Alloy Steel Wire |
| |
| Indian Standard |
: |
IS 4454 Part III, Grade-2D (Chrome Silicon) |
| Equivalent International Standards |
: |
ASTM A-401 |
| DIN-17223-2 FDSiCr |
| DIN-17223-2-VDSiCr |
| EN-10270-2 FDSiCr |
| EN 10270-2-VDSiCr |
| Chemical Composition |
| Carbon(C) |
: |
0.50-0.60 |
| Silicon (Si) |
: |
1.20-1.60 |
| Manganese (Mn) |
: |
0.50-0.80 |
| Chromium (Cr) |
: |
0.50-0.80 |
| |
| |
| Stainless Steel Wire |
| |
| Indian Standard |
: |
IS 4454 part-IV Gr- 1 & 2 |
| Equivalent International Standards |
: |
AISI 302 |
| AISI 304 |
| ASTM A 313 |
| DIN 17224 |
| EN 10270-3 |
| Chemical Composition |
| |
|
GR-1 |
GR-2 |
| Carbon(C) |
: |
0.15 Max |
0.09 Max |
| Silicon (Si) |
: |
1.00 Max |
1.00 Max |
| Manganese (Mn) |
: |
2.00 Max |
1.00 Max |
| Chromium (Cr) |
: |
17-19 |
16.00-18.00 |
| Nickel(Ni) |
: |
8-10 |
6.75-7.75 |
HIGH CARBON SPRING STEEL WIRES
We can supply High Carbon Spring Steel Wires to the customer requirement within the specification as per IS : 4454 (Part-1) - 1981 and IS: 4454 Part 2 - 2001. Wires availbale are Grade I, Grade II, Grade III, Grade IV, Flattening Quality (FQ) in both black and galvanized and Oil tempered (OT wire)/ 2D wires in desired sizes. The wire supplied by us are used for a vast variety of purposes with some of the major ones being:
GRADE
APPLICATION
Grade 1 (As per IS 4454 Part 1 - 1981) /
Grade SL (As per IS 4454 Part 1 - 2001)
1. Auto components after flattening of wire.
2. Steel screen for iron ore and coal industries.
3. Wire shaped products made from wire forming.
Flattening Quality (FQ)
1. Auto cables
2. Formed auto components
Grade 2 (As per IS 4454 Part 1 - 1981) /
Grade SM (As per IS 4454 Part 1 - 2001)
Tension & Torsion springs for use in Industrial / Auto sector
Grade 2 (As per IS 4454 Part 1 - 1981) /
Grade SM (As per IS 4454 Part 1 - 2001)
High precision torsion & Compression spring used in Industrial & Auto sector.
Oil tempered wire (OT wire) - Penthor 811, 843 & 864
(As per IS 4454 Part 2 - 2001)
High precision torsion & Compression spring used in Industrial & Auto sector.
| Alloy |
C |
Mn |
P |
S |
Si |
Cr |
Other |
|
| C1010 |
.08-.13 |
.30-.60 |
0.040 |
0.050 |
|
|
|
|
| C1050 |
.48-.55 |
.60-.90 |
0.040 |
0.050 |
|
|
|
|
| C1075 |
.70-.80 |
.40-.70 |
0.040 |
0.050 |
|
|
|
|
| C1095 |
.90-1.03 |
.30-.50 |
0.040 |
0.050 |
|
|
|
|
| HDMB |
.45-.85 |
.30-1.30 |
0.040 |
0.050 |
.15-.35 |
|
|
|
| OTMB |
.55-.85 |
.30-1.20 |
0.040 |
0.050 |
.15-.35 |
|
|
|
| MUSIC WIRE |
.70-1.00 |
.20-.60 |
0.025 |
0.030 |
.10-.30 |
|
|
|
| CHROME SILICON |
.51-.59 |
.60-.80 |
0.035 |
0.040 |
1.20-1.60 |
.60-.80 |
|
|
| CHROME VANADIUM |
.48-.53 |
.70-.90 |
0.040 |
0.040 |
.15-.35 |
.80-1.10 |
V .15 |
| Alloy |
|
|
Characteristics |
|
|
|
Typical Specification |
| C1010 |
Basic Steel, good formability, not heat treatable |
|
|
ASTM A-805 |
| C1050 |
Good formability in the annealed condition, heat treatable to higher hardness, |
|
| C1075 |
higher carbon content contributes to higher hardness |
|
|
ASTM A-805 |
| C1095 |
|
|
|
|
|
|
|
|
| HDMB |
Spring wire, suitable for parts subjected to high stress and /or infrequent stress |
ASTM A-227 |
| |
repetitions |
|
|
|
|
|
|
|
| OTMB |
Spring wire, similar to HDMB, better suited for some applications because of the |
ASTM A-229 |
| |
tighter control of the tensile strength and better straightness of OTMB |
|
|
| MUSIC WIRE |
Spring wire, good for parts subjected to high stresses and requiring good |
ASTM A-228 |
| |
thermal properties |
|
|
|
|
|
|
| CHROME SILICON |
Spring wire, high endurance properties at elevated temperatures |
|
ASTM A-401 |
| CHROME VANADIUM |
Spring wire, high fatigue properties at elevated temperatures |
|
ASTM A-231 |
OTEVA® 101 SC, Oil tempered SiCrVMoW-alloyed ultra-high tensile clutch and transmission spring wire for surface nitriding
Product sheet
Description: OTEVA® 101 SC is a Super Clean steel especially intended for the manufacture of clutch and transmission springs and other springs requiring high fatigue properties and good relaxation properties at increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 2.00 mm to 5.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 5.00 mm. Other wire sizes on request.
OTEVA® 91 SC, Oil tempered SiCrVMo-alloyed ultra-high tensile valve spring wire for surface nitriding
Product sheet
Description: OTEVA® 91 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring extremely high fatigue properties and good relaxation properties at increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 2.00 mm to 6.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.
OTEVA® 90 SC, Oil tempered SiCrVNi-alloyed ultra-high tensile valve spring wire for surface nitriding
Product sheet
IMDS No.: 4982603 / 1
Description: OTEVA® 90 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring extremely high fatigue properties and good relaxation properties at increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 2.00 mm to 6.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.
OTEVA® 76 SC, Oil tempered SiCrVNi-alloyed high tensile valve spring wire - Only manufactured in USA and China
Product sheet
Description: OTEVA 76 SC is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperatures. Manufactured as standard in shaved condition and in sizes from Ø 2.00 mm to 6.00 mm, or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.
OTEVA® 75 SC, Oil tempered SiCrV-alloyed high tensile valve spring wire
Product sheet
IMDS No.: 47544916 / 1
Description: OTEVA® 75 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 1.60 mm to 6.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.
OTEVA® 70 SC, Oil tempered SiCr-alloyed valve spring wire
Product sheet
IMDS No.: 12364020 / 1
Description: OTEVA® 70 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperature. The wire is manufactured in shaved or unshaved condition (Ø 6.50 – 14.00 mm in unshaved condition subcontracted) in sizes from Ø 0.50 mm to 6.50 mm, or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.
SWOSC-VHV, Oil tempered SiCrV-alloyed high tensile valve spring wire - Only manufactured in China
Product sheet
Description: SWOSC-VHV is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperatures. The wire is manufactured in shaved condition in sizes from Ø 1.60 mm to 6.50 mm, or in egg or elliptical shape (corresponding to round cross section 2.50 mm to 6.50 mm). Other wire sizes on request.
SWOSC-V, Oil tempered SiCr-alloyed valve spring wire - Only manufactured in China
Product sheet
Description: SWOSC-V is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperature. The wire is manufactured in shaved condition in sizes from Ø 1.60 mm to 6.50 mm, or in egg or elliptical shape (corresponding to round cross section 2.50 mm to 6.50 mm). Other wire sizes on request.
75 KD, Oil tempered SiCrV-alloyed clutch and transmission spring wire
Product sheet
Description: 75 KD is especially intended for the manufacture of clutch and transmission springs and similar moderately high fatigue stressed springs. The material has good relaxation properties. The wire is manufactured in sizes from Ø 1.60 to 7.00 mm. Other wire sizes on request.
70 KD, Oil tempered SiCr-alloyed clutch and transmission spring wire
Product sheet
IMDS No.: 673628 / 1
Description: 70 KD is especially intended for the manufacture of clutch and transmission springs and similar moderately high fatigue stressed springs. The material has good relaxation properties. The wire is manufactured in sizes from Ø 0.50 to 7.00 mm.
STATO 75, Oil tempered SiCrV-alloyed spring wire
Product sheet
Description: STATO 75 is especially intended for the manufacture of springs exposed to static or moderately high fatigue stresses. The material has good relaxation properties. The wire is manufactured in sizes from Ø 2.00 mm to 7.00 mm. Other wire sizes on request.
STATO 70, Oil tempered SiCr-alloyed spring wire
Product sheet
Description: STATO 70 is especially intended for the manufacture of springs exposed to static or moderately high fatigue stresses. The material has good relaxation properties. The wire is manufactured in sizes from Ø 0.50 mm to 7.00 mm.
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 - 9820292499
Email - marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI - 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email - marketing@rolexmetals.com
Website – www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
